Chapter 18

1) The preferred protocol for Dial-up Networking is
            a) SLIP
        * b) PPP
            c) NetBEUI
            d) TCP/IP

    2) The service that enables Windows NT to be set up with different dial in locations is
            a) RAS
            b) NetBIOS Gateway
            c) Multilink
        * d) Telephony API

    3) The feature that can disconnect your system after being idle for a given length of time is
            a) SPAP
        * b) Auto dial
            c) Remote Access Admin
            d) SLIP

Q1. To dial in to the network, which server must be installed?
a) SMS
b) RAS
c) SQL
d) DHCP
Ans. (b)

Q2. For the best performance, you should connect a modem to ____.
a) COM3
b) COM1
c) COM2
Ans. (c)

Q4. What network protocol RAS server does support? (choose all that apply)
a) RIP
b) SAP
c) NETBEUI
d) NWLINK
e) TCP/IP
Ans. (c,d,e)

(1). Choose the dail-in protocols Windows NT does not support?
a.SLIP ***
b.PPP
c.PPPT
d.Multilink ***

(2). RAS provides what type of service?
a.Real Address Support
b.Remote Address Support
c.Remote Access Support
d.Remote Access Service ***
e.Remote Access Systems

1. What does RAS Stand for? What does RAS server do?
RAS Stands for Remote Access Service. RAS server enables multiple users to dial in to your network.

2. Where must RAS be installed for anyone to succeed in dialling in to the network?
a. Installed on the Server**
b. Installed on the Client**
c. (True/False) Telephony API can not be set to turn off call waiting! FALSE**

1. Name 3 changes required for configuring a RAS Server ?
a. RAS Setup
User Manager for Domains
RAS Administrator

2. How many inbound RAS connections can Workstation and server handle ?
a. 1 Workstation ,236 Server
5 Workstation , 256 Server
1 Workstation , 256 Server ***
2 Workstation , 193 Server

3. Can you enter more then one phone number per Phonebook entry ?
a. TRUE ***
FALSE

1. What are the three types of callback security used in Remote Access Server?
Preset to, Set by Caller, No Call Back

2. RAS can be configured to: D
    A. Dial out only
    B. Receive calls only
    C. Dial out and Receive calls
    D. All above

3. You must have at least 1 ______ to use RAS. C
    A. Acknowledgement Sequence
    B. Editing Entry
    C. Phonebook Entry

1. WHAT SERVICE DOES RAS PROVIDE?
A. DIAL-IN NETWORKING FOR WIN NT WORKSTAION AND SERVER        *
B. DIAL-IN NETWORKING ONLY FOR NT WORKSTAION
C. DIAL-IN NETWORKING ONLY FOR SERVER

2. HOW MANY CONNECTIONS CAN A WORKSTATION HANDLE USING RAS?
A. ONE           *
B. TEN
C, TWENTY
D, ONE HUNDRED

3. WHAT ENABLES YOU TO TUNNEL OTHER PROTOCOLS WITHIN IT FOR TRANSMISSION OVER
THE NETWORK?
A. DHCP
B. TCP/IP
C. RAS
D. PPTP           *

5. The preferred protocol for the majority of Internet Access providers is_________
A. Point-to-Point protocol
B. Serial Line Interface Protocol Answer (A page 521)

6 Three protocols can be used to dial into a RAS server, they are (choose three)
A. TCP/IP
B. SLIP
C. NetBEUI
D. NwLink Answer ( A, C, & D page 542)

1.What service does RAS provide?
A.Dial in access
B.Internet access
C.Password access

2.What is multilink?
A.ables you to use more than 1 modem with ras
B.lets your computer be a stand alone.
C.Routes to other computers

1. WHAT ENABLES YOU TO TUNNEL OTHER PROTOCOLS WITHIN IT FOR TRANSMISSION OVER THE NETWORK?
A. DHCP
B. TCP/IP
C. RAS
D. PPTP *

2. RAS provides what type of service?
a.Real Address Support
b.Remote Address Support
c.Remote Access Support
d.Remote Access Service *
e.Remote Access Systems

1.What does RAS stand for?
Remote Access Service

2.Which one of the following would you choose if you don’t wish to configure call back security?
a. preset to
b. set by caller
c. no call back *

3.What does PPTP stand for?
Point-to-Point Tunneling Protocol

Chapter 18 Test Questions